Twystlock | nowsci.com
nowsci.com
100% 3D printable gaming accessories that require no printed supports or additional parts.

cross-posted from: https://lemmy.nowsci.com/post/9782596

Hi all,

I’ve finally gotten around to releasing these formally after much testing of prints and usage.

The Twystlock system is a set of 100% 3D printable gaming accessories that require no printed supports or additional parts. This means no springs to buy and no metal elements to melt in, just access to a 3D printer and a bit of super glue. Originally designed for the Steam Deck, these accessories can be applied to the case of any mobile gaming device.

The Twystlock connector itself is designed as a quick-connect that secures parts together with a simple twist motion, can be fully recreated with affordable home-based 3D printers, and doesn’t require complicated supports to print. The first use of this connector has been for the Steam Deck, specifically to supply an alternative accessory platform that is more accessible to the everyday 3D printing hobbyist, however it could be utilized as a connector in almost any environment.

Feel free to download what you like, and if you would like to request a new accessory design, or vote on the next accessory to be created, please visit our Lemmy community at https://lemmy.world/c/twystlock@lemmy.nowsci.com.

  • Fubarberry@sopuli.xyzMEnglish
    6·
    4 months ago

    This is pretty cool, thanks for sharing. I know mechanism/deckmate has 3D models available as well, but their designs require springs/screws/etc, so this has some serious advantages for being print in place.

    • moody@lemmings.world
      5·
      4 months ago

      Unless I’m looking at it wrong, it’s not print in place, it needs to be glued together. It looks like a 2-piece set for either side. To be printed in one piece, it would require non-removable supports.

      • Fubarberry@sopuli.xyzMEnglish
        4·
        4 months ago

        Ok yeah you’re right. That’s still pretty good though, for comparison mechanism sells this kit in order to get their 3D printed designs working. This seems much easier to assemble.

      • fmstrat@lemmy.nowsci.comOPEnglish
        3·
        4 months ago

        This is correct. There are alignment holes and tabs for everything, so it’s pretty painless. It was a requirement to have zero supports, which is more work than a dot of glue IMO, so I went that route.

  • jqubed@lemmy.world
    5·
    4 months ago

    Wait, you just created a new lockable quick connector that can be 3D printed with no other parts required? This seems bigger than Steam Deck!

  • saintshenanigans@programming.dev
    1·
    4 months ago

    These are awesome! If i can make a suggestion:

    Adapters to lock into the jsaux and killswitch mounts! Idk about jsaux but i know that dbrand published 3dp files for theirs!

    • fmstrat@lemmy.nowsci.comOPEnglish
      1·
      3 months ago

      I might look at this, but part of this for me was the engineering experience of building the connector along with supportless parts. So I’m not sure how much time I’d put into adapting away from that. Thanks for the suggestion!

    • Fubarberry@sopuli.xyzMEnglish
      1·
      3 months ago

      This was my first thought as well, so I looked into it. Turns out JSAUX does provide a range of 3d printable models that can quickly connect to the modcase (as well as a template for modeling new attachments). You can see the models here on JSAUX’s printables page.

      Included models for it include:

      • A Deckmate adapter.
      • A wall mount perfect to use when you want to enjoy your games on a TV.
      • A VESA-styled mount, like the one used on modern gaming monitors, to help you adapt the position of your Steam Deck.
      • An universal adapter.
      • A TF card slot for microSD cards.
      • A hard disk adapter to replace the ModCase kickstand.

      Edit: Here’s the model for designing new attachments