I spent all day today trying to get the routing to work correctly between Tailscale, Nginx and Adguard.

Basically I wanted to be able to be able to use **http://immich.network ** to route to 192.168.1.2:9000

I wanted to share the steps I took so people don’t have to go through what I did.

First a few things Local Server IP: 192.168.1.2

  1. I installed Ngnix and Adguard, in a Docker Containers, and gave Adguard IPs 3000, 3001 instead of 80 and 443 because Ngnix took it.
  2. I went to my router and made it use the DNS: 192.168.1.2
  3. I configured Proxy Host in Ngnix … immich.network => 192.168.1.2:9000
  4. I configured DNS rewrite in Adguard … *.network => 192.168.1.2

At this point I was able to use http://immich.network finally. I installed Tailscale to be able to access when I’m outside but http://immich.network didn’t work.

These helped me https://tailscale.com/kb/1019/subnets + https://tailscale.com/kb/1054/dns?q=global+nameserver

  1. I created a subnet… tailscale up --advertise-routes=192.168.1.0/24
  2. I approved it on Tailscale login

At this point I was able to access home server using its local IP 192.168.1.2 but I couldn’t get http://immich.network to work.

  1. I created a nameserver dns with split DNS but I used my local ip… 192.168.1.2 => network

Finally everything is working… I have a feeling that I’m doing it wrong but I’m too tired and it’s finally working.

    • LifeBandit666@feddit.uk
      link
      fedilink
      English
      arrow-up
      1
      ·
      6 months ago

      I’ve just looked this up. So is Yunohost supposed to replace Proxmox or can I install it as a service in Proxmox? Will it run in Docker?

      I’d have a go at installing it if my 10 year old wasn’t saving democracy on my PC at the mo (playing Helldivers 2) there’s no way I can prize him off that just to tinker with and ultimately uninstall, another service for a few hours. I got shit to do today.

      • helenslunch@feddit.nl
        link
        fedilink
        English
        arrow-up
        3
        ·
        6 months ago

        No, Proxmox is a hypervisor. This is just a server management tool.

        You can install on a Debian 11 VM, absolutely.

      • lemmyreader@lemmy.ml
        link
        fedilink
        English
        arrow-up
        2
        ·
        6 months ago

        Yunohost is doing the installation and finishing with having a XMPP and email server, and from there you can install apps on top of that. You can play with Yunohost inside a container if you wanted to but you will have to prepare the proxy in front of it. If you want to try Yunohost the easiest way, rent a VPS for it.